POWER OVER ETHERNET INJECTOR - 24V WITH AC INPUT (Model: TPE 124-A)
Telenet’s Midspan POE is a Power-over-Ethernet (Poe) power supply which provides DC power for one Poe-equipped device by "Injecting" DC power through the Spare Pair of the CAT5 (10/100Mbps) Ethernet cable.
Electrical Specifications
Nominal Operating Voltage VN
230 V AC, 1 Phase,50 Hz ± 1%
Input Operating Voltage Range
140V – 300 V AC ± 1%
Output Voltage Range
24V ± 5%
Output Current
1AMP ± 1%
Ripple & Noise at I/P 230V AC & Full Load
100Mv
Line & Load Regulation
±3%
Working environment
Temperature -40 - +55c
Humidity relative 90% (25c), altitude 3km
Humidity relative 90% (25c), altitude 3km
Protections
Input
Surge protection
Output
Overload ± 5% & short circuit
Product Safty
Insulation resistance
5ohm when tested with 500Vdc
Dielectric voltage withstand test Between shorted input & output Terminals
1.5kv AC rms for 1min
Terminations
A C input
3 pin plug-in type as per IS
power cord
3 pin power cord
Enclosure
Material
ABS plastic
Accessibility
easy accessible to open top & bottom cover
POE Injector
Power over Ethernet injector
24V @ 24W on spare pair
Cat-5 cable data lines
Pair1: pins 1/2, pair2: 3/6
Cat-5 cable power lines
-V dc pins 4/5, + Vdc pins 7/8
Connector
2 RJ 45 Metallic Ports