telenetsystemsindia

Managed Switches

TSW 1008X 8 Ports Managed Switch

Telenet's managed switch is the latest generation of fast Ethernet switching technology. Enhanced by it's many features including port trunking, VLAN tagging, spanning tree, and broadcast storm filters. Eight 10/100Base-TX auto sensing, auto MDI/MDIX ports provide a completely flexible high-performance non-blocking full wire speed solution.

The management features include port-based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP Snooping, port mirroring and port security. Two priority queues per port insure minimum delay for voice over IP or multimedia broadcasting. Network management can be accessed via Telnet from anywhere on the network or via a console port at the switch.

The 10/100 Mbps ports supporting auto-sensing and auto-negotiation of network speeds and full/half duplex. These ports can connect to workstations and print servers, giving each a dedicated bandwidth. All ports support auto MDI-II/MDI-X uplink, allowing you to connect to workstations, servers, or other switches from any port without the need to change your usual straight-through to twisted-pair cables.

Flow Control to Prevent Packet Loss.The switch supports standard IEEE 802.3x Flow Control. Working in conjunction with buffer overrun auto-detection, this full-duplex data transfer mode provides protection against possible data loss for 802.3x supported servers directly connected to the switch.

The advanced features, 802.1p, DiffServ, 802.1x*, IGMP, and 802.1q, facilitate the deployment of applications across an enterprise such as: VOIP, streaming media, and multicast content delivery (IP video conferencing, software deployment).

Technical Specifications

Power

110/220V AC.

Physical Interfaces

10/100 Base T (IEEE 802.3) RJ-45

Management

Telnet [RFC 854]/CLI based management
SNMP v1 supported.

IETF/IEEE Standard Support

Telnet [RFC 854]
SNMP v1 [RFC 1157]
MIB II [RFC 1213], support for system and Interface group
IEEE 802.3 CSMA/CD networks
IEEE 802.3u 100BaseTX
IEEE 802.3x Full Duplex and Flow control in CSMA/CD Handiworks
IEEE 802.1Q Virtual Bridged Area Networks (please note no support for spanning tree and RST.)
IEEE802.1P Class of service
IETF: RFC 1155 SMI
DHCP Client [RFC 2131]
IEEE802.1X Authentication

Bandwidth Management

Bandwidth control - Between 128k to 8M in multiples of 2
Port Privacy – Individual ports can be isolated from the remaining ports. Per port VLAN between the uplink port and any of the switches' ports.
QoS and Priority queuing – 4 levels of priority with configurable WRR or Strict Priority Queuing. Priority queuing based on the Differentiated Services Code point (DSCP) [RFC 2474] or 802.1p priority bits.

Switch Feature

MAC table size – 1024 entries in the MAC table
Forwarding mechanism – Store and Forward
Switch Fabric - 3.2gbps, supporting wire speed forwarding when all the ports are running at full speed.
VLAN groups - upto 64 different VLAN IDs simultaneously can be processed.
Supports Port Mirroring /Port Security
Auto MDI-MDIX
Port Trunking
Light Console Management

Physical and environmental

Dimensions and weight 105mm x 165mm x 35mm
Temperature 50 to 400 C
Storage 00 to 850 C
Humidity 20% to 90%

TSW1026X 24 Ports L2/L4 Managed Switch

« Request a Quote

The Telenet TSW1026X is a Layer 2 standalone switch with 24 10/100Base-T (RJ-45) ports and two expansion slots for Gigabit or 100Base-FX fiber interface.

The TSW1026X can be managed either by in-band management via the network station remotely or out-of-band management via the console port.

Physical Ports

24 RJ-45 10/100Base-T port
2 expansion slots

L2 Features

Full duplex mode on port 25 and 26 when work in the Gigabit speed.
Auto MDI/MDIX on all 10/100Base-TX ports
Up to 8K MAC address entries
4M-bit for packet buffer size
Provides flow control mechanism: backpressure for half duplex; IEEE802.3x for full duplex operation.
Store-and-forward forwarding scheme
HOL (Head of Line) blocking prevention
Port mirroring
Provides Link Aggregation

TSW 1026XA 24 Port L2/L4 Managed Switch (Standalone)

« Request a Quote

The Telenet TSW1026XA L2/L4 Fast Ethernet Standalone Switch is equipped with 24 10/100BASE-T(RJ-45) ports, 2 Combo G (RJ-45/SFP) ports.

The TSW1026XA is loaded with features such as VLANs, GVRP and IGMP, thus provides an easy-to-configure and easy-to-manage network environment. TSW1026XA is perfect for cost-sensitive medium to large network looking to strengthen its network connection.

High Performance

The unit comes equipped with a high-performance architecture with a total capacity of 8.8 Gbps. The GVRP allows automatic configuration of VLAN and IGMP snooping to identify multicast traffic to make an efficient utilization of the switch bandwidth. It also allows to aggregate greater bandwidth between devices by supporting IEEE 802.3ad (LACP). In addition, the IEEE 802.1p four queues help to prioritize time-sensitive applications such as multimedia voice traffic.

Security and Redundancy

Port-based MAC filtering prevents unauthorized user to access to the switch. IEEE 802.1D Spanning Tree Protocol support for loop-free networks improves fault tolerance and simplifies network configuration. In addition, RPU connectivity provides power fault tolerance to ensure a reliable system.

Comprehensive Manageability

The system can be managed and monitored via SNMP/RMON protocol through any computer using network management software or via an Internet web browser. Comprehensive LED indicators are located on the front panel to assist network administrators in troubleshooting. The Port Mirroring feature provides a non-intrusive mechanism for traffic inspection across the whole switch. With the help of our powerful management features the status of the Telenet Switch can be obtained at a glance.

Features and Benefits

L2/L4 Switching Feature

Full-duplex mode on port 25 and 26 when work in the Gigabit speed.
Auto MDI/MDIX on all 10/100 Base-TX ports
Up to 8K MAC address entries
4M-bit for packet buffer size
Provides flow control mechanism: backpressure for half duplex; IEEE802.3x for duplex operation
Store-and-forward forwarding scheme
HOL (Head of Line) blocking prevention
Port mirroring
Provides Line Aggregation
- Up to 8 ports in on trunk
- Up to 4 trunk groups
- Trunks across switches
- Supports 802.3ad (LACP)
- Cisco Ether-channel (static truck)
- Load Balance for both Unicast and Multicast traffics Supports VLAN
- IEEE 802.1Q tagging VLAN
- Port-based VLAN

TSW 1052XA 48 Port L2/L4 Managed Switch (Standalone)

« Request a Quote

The Telenet TSW1052XA L2/L4 Fast Ethernet Standalone Switch is equipped with 48 Auto-MDI/X 10BASE-T/100BASE-TX ports and 4 Gigabit ports. 2 of the Gigabit ports support combo links with RJ-45 or Mini-GBIC connector. The TSW1052XA is loaded with features such as VLANs, GVRP and IGMP, thus provides an easy-to-configure and easy-to-manage network environment. TSW1052XA is perfect for cost-sensitive medium to large network looking to strengthen its network connection.

High Performance

Provides high performance architecture with 12 Gbps total capacity. GVRP allows automatic configuration of VLAN, IGMP snooping to identify multicast traffic to make an efficient utilization of the switch bandwidth. Aggregate grater bandwidth between devices by supporting IEEE 802.3ad (LACP). IEEE 802.1p four queues help to prioritize time-sensitive applications such as multimedia voice traffic.

Flexible Uplink SFP port

Two SFP ports support both single mode and multimode Gigabit fiber to allow network managers the flexibility to upgrade their networks based on their requirements.

Security and Redundancy

Port-based MAC filtering prevents unauthorized user to access to the switch. IEEE 802.1D Spanning Tree Protocol support for loop free network improves fault tolerance and simplifies network configuration. RPU connectivity provides power fault tolerance to ensure a reliable system.

Comprehensive Manageability

The system can be managed and monitored via SNMP/RMON protocol through computer using network management software or via an Internet web browser. Comprehensive LED indicators are located on the front panel to assist network administrators in troubleshooting. Port Mirroring feature provides a nonintrusive mechanism for traffic inspection across the whole switch. With the help of our powerful management features the status of the TSW Switch can be obtained at a glance.

The TSW1052XA L2/L4 Fast Ethernet Standalone Switch is equipped with 48 Auto-MDI/X10 BASE-T/100BASE-TX ports and 4 Gigabit ports. 2 of the Gigabit ports support combo links with RJ-45 or Mini-GBIC connector.

The TSW1052XA is loaded with features such as VLANs, GVRP and IGMP, thus provides an easy-to-configure and easy-to-manage network environment TSW1052XA is perfect for cost-sensitive medium to large network looking to strengthen its network connection.

L2 Switching Feature

MAC address : 8K Provides IEEE 802.
3x flow control for full duplex mode and backpressure for half duplex mod

TSW 1008X 8 Ports 10/100	TSW 1026X 24 Ports 10/100 2G Expansion Slots	TSW 1026XA 24 Port 10/100 2 Port Combo GE	TSW1052XA 48 Port 10/100 2 Port 10/100/1000 2 Port Combo GE